Conventional LAB Fume Hood For Chemical PP
A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.
Two main types exist, ducted and recirculating (ductless). The principle is the same for both types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room.
Air Flow Pattern
Exhaust Principle
1. Dirty room air is drawn into the front of the fume hood.
2. Room air mixes with potentially contaminated air from chamber and is pulled upward by the bulding exhaust.
3. Air split at back of hood increases exhaust and reduces turbulence.
4. Contaminated air drawn from fume hood by building exhaust fan and leaves through air stacks on room
Safety Note: Only provide personal protection. No HEPA filters to remove biological agents. Contaminates reduced to acceptable levels by dilution with environmental air.
Fume Hood Parameters
| Item | GCC-FH-1200 | GCC-FH-1500 | GCC-FH-1800 |
| Internal Size | L000*W700*H2350mm | L1300*W700*H2350mm | L1600*W700*H2350mm |
| External Size | L1200*W800*H700mm | L1500*W800*H700mm | L1800*W800*H700mm |
| Wind Speed | 0.3~0.8m/s |
| Noise | ＜65dB |
| Air Flow | 1200m³/h | 1800m³/h | 2300m³/h |
| Efficiency | 99.99%@0.3μm |
| Voltage | 220V/50Hz |
Advantages Of Our Fume Hood
1. Our fume hood is made of durable polypropylene, which is acid, alkali and corrosion resistant.
2. The front window is made of thick transparent tempered glass, which maximizes the light and visibility in the fume hood and provides a bright and open working environment
Product Tags:
|
|
50hz LAB Clean Room Fume Hood Polypropylene Conventional For Chemical PP Images
|
